2K HD Screen + MKS DLP V1.0 Motherboard + MKS ROBIN TFT35 V1.0 Colorful Touch Screen with FFC Cable for UV Resin 3D Printer Open Source Mainboard

$165.20

Category: 3D Printer Module Board

Description
Additional information
Reviews (0)

Parameters:

Motherboard model: MKS DLP

Input voltage: 12~24V

Motherboard size: 119mm * 85mm

Firmware type: MKSDLP firmware

Print file format: mdlp format file

Operation screen: MKS RoinTFT35 touch screen

Oscillator: STM32F407

Memory processor: ALTERA EPN1270T

Installation size 112mm * 78mm

Update method: U disk

Recommended slicing software: MKS DLP

Forming screen: L S055R1SX04 resolution (1440 * 2560)

Characteristic & Advantage:

● Most traditional LCD light curing solutions are patched together using “RaspberryPi + HDMI to MIPI Driver Board + Zaxis Driver Board + Serial Screen”. The board is more complex, complicated to route, and naturally costly. high.

● The MKS DLP motherboard adopts the main solution, and the main control and memory processor are integrated on the mainboard.

The 3.5-inch touch screen is directly connected, which is equivalent to the "four-in-one" of the traditional solution. Currently supports the direct connection of Sharp 5.5-inch 2K HD imaging screen LSO55R1SX04, and supports U disk offline printing.

● To facilitate the user to modify the function and jointly promote LCD light curing technology, MKS opened the motherboard schematic, motherboard firmware and slicing software MKS DHOST. For more information, see the official GitHub for make base: https://github.com/maker-base-mks/MKS-DLP

● The package includes MKS DLP V1.0 motherboard, MKS ROBIN TFT35 V1.0 touch screen, and FFC cable. It is a perfect replacement kit for your old or damaged.

About Slicing software:

● Use MKS DHOST directly. MKS DHOST software scams MKS DLP motherboard, supports manual support, automatic support, and other functions, the speed is very fast, directly slicing out the ".mdlp" file printed on the U disk, very easy to use.

● Other software: Provide conversion function in MKS DHOST, you can directly open the traditional ".zip", ".cws" light-cured file package to convert to the ".mdlp" file format applicable to the motherboard. Therefore, users can use the slicing software such as Creation Workshop to sliceout ".zip" or ".cws" files. Then use MKS DHOST to open and convert to ".mdlp" file format, you can achieve U Pan printing in MKS DLP motherboard.

Package Included:

1 x MKS DLP V1.0 Motherboard

1 x MKS ROBIN TFT35 V1.0 color display touch screen

1 x 33cm FFC cable

1 x 2K Screen